This is a high precision planetary gearbox stepper motor which is assembled from a range of 35mm (NEMA14) square hybrid stepper motors and cylindrical planetary gearboxes.Motor lengths for this product generally range from 32.4 to 56.7mm, and special lengths can be customised. The longer the length, the higher the torque of the motor.In addition, there are two options for the stepping angle of the motor. 0.9 degrees and 1.8 degrees, with the more common stepping angle being 1.8 degrees.Reduction gearboxes are also available in many different speed ratios from 3.71 to 3729.5. Reduction gearboxes with different speed ratios have different gear stages and of course different lengths, the longer the length the lower the efficiency.As the efficiency of transmitting torque varies with the number of gear stages in the gearbox, the main factors such as assembly space, required speed and torque should be considered first when selecting a motor and gearbox. When the motor meets all these specifications, it can be initially sized and then specific details such as exit connections and output shaft shape can be considered.If you are interested in one of our products, please send me an e-mail message.If we have samples in stock, we can ship out samples in 3 days. If we do not have samples in stock, we need to produce them, production time is about 20 calendar days. For mass production, lead time depends on order quantity.For samples, in general we accept Paypal or alibaba. For mass production, we accept T/T payment.For samples, we collect full payment before production. For mass production, we can accept 50% pre-payment before production, and collect the rest 50% payment before shipment. After we cooperate order more than 6 times, we could negotiate other payment terms such as A/S (after sight)By Metric unit (unit: mm) or by Imperial unit (unit: inch) For example, a 42mm motor = a 1.7 inch stepper motor. So a 42mm motor can also be called as NEMA 17 motor.
Gear levels
Efficiency
Gearbox length
Optional gear ratio
1
90%
32.4
3.71:1, 5.181:1
2
80%
37.2
13.761:1,19.221:1, 26.831:1
3
72%
43.5
51:1, 71.30:1, 99.55:1, 138.99:1
4
65%
50.4
189.45:1,264.52:1,369.32:1,515.66:1,719.98:1
5
58%
56.7
981.35:1,1370.2:1, 1913.1:1,2671:1, 3729.5:1
Hybrid stepper motors are in general square shape, and a stepper motor can be identified by its unique outer shape.A hybrid stepper motor has 1.8°step angle（200 step/revolution） or 0.9°step angle (400 steps/revolution). Step angle is determined by tooth number on rotor’s laminations.For example, 42HS40 stepper motor: 42 means the size is 42mm, so it’s a NEMA17 motor. HS means Hybrid Stepper motor. 40 means the height is 40mm motor. We have different height for customers to choose, with bigger height, a motor will have higher torque, bigger weight, and higher price. Here is internal structure of a regular hybrid stepper motor.Due to high resolution of hybrid stepper motor’s (200 or 400 steps per revolution), they are widely used for applications requiring high precision, such as: 3D printing Industrial control(CNC, automatic milling machine, textile machinery) Computer peripherals Packing machine And other automatic systems requiring high precision control.Customers should follow the principle of “selecting stepper motors first, then select driver based on existing stepper motor” It is best not to use the full-step driving mode to drive a hybrid stepping motor, and the vibration is bigger under full-step driving. Hybrid stepper motor is more suitable for low-speed occasions. We suggest the speed does not exceed 1000 rpm (6666PPS at 0.9 degrees), preferably between 1000-3000PPS (0.9 degrees), and it can be attached with a gearbox to lower it’s speed. The motor has high working efficiency and low noise at suitable frequency. Due to historical reasons, only the motor with a nominal 12V voltage uses 12V. Other rated voltage on design drawing is not exactly the most suitable driving voltage for the motor. Customers should choose suitable driving voltage and suitable driver based on own requirement. When the motor is used with high speed or large load, it generally does not start at the working speed directly. We suggest to gradually increases the frequency and speed. For two reasons: First, the motor does not lose steps, and second, it can reduce noise and improve the positioning accuracy. The motor should not work in the vibration area(below 600 PPS ). If it must be used at slow speed, vibration problem could be reduced by changing the voltage, current or adding some damping. When the motor works below 600PPS (0.9 degrees), it should be driven by small current, large inductance and low voltage. For loads with a large moment of inertia, a large size motor should be selected. When higher precision is required, it could be solved by adding gearbox, increasing the motor speed, or using subdivision driving. Also a 5-phase motor(unipolar motor) could be used, but the price of the entire system is relatively expensive, so it’s rarely used.We currently have 20mm(NEMA8), 28mm(NEMA11), 35mm(NEMA14), 42mm(NEMA17), 57mm(NEMA23), 86mm(NEMA34) hybrid stepper motors. We suggest to determine motor size first, then confirm other parameter, when you select a hybrid stepper motor.We provide customization service on motor including lead wire number(4wires/6wires/8wires), coil resistance, cable length and color, also we have multiple height for customers to choose. Regular output shaft is D shaft, if customers require leads screw shaft, we provide customization service on lead screws, and you can adjust lead screw type and shaft length. Picture below is a typical hybrid stepper motor with trapezoidal lead screw.
If we have samples in stock, we can ship out samples in 3 days. If we do not have samples in stock, we need to produce them, production time is about 20 calendar days. For mass production, lead time depends on order quantity.For samples, in general we accept Paypal or alibaba. For mass production, we accept T/T payment. For samples, we collect full payment before production. For mass production, we can accept 50% pre-payment before production, and collect the rest 50% payment before shipment. After we cooperate order more than 6 times, we could negotiate other payment terms such as A/S (after sight)
By Metric unit (unit: mm) or by Imperial unit (unit: inch) For example, a 42mm motor = a 1.7 inch stepper motor. So a 42mm motor can also be called as NEMA 17 motor.
Hybrid stepper motors are in general square shape, and a stepper motor can be identified by its unique outer shape. A hybrid stepper motor has 1.8°step angle（200 step/revolution） or 0.9°step angle (400 steps/revolution). Step angle is determined by tooth number on rotor’s laminations.For example, 42HS40 stepper motor: 42 means the size is 42mm, so it’s a NEMA17 motor. HS means Hybrid Stepper motor. 40 means the height is 40mm motor. We have different height for customers to choose, with bigger height, a motor will have higher torque, bigger weight, and higher price. Here is internal structure of a regular hybrid stepper motor.
Due to high resolution of hybrid stepper motor’s (200 or 400 steps per revolution), they are widely used for applications requiring high precision, such as: 3D printing Industrial control(CNC, automatic milling machine, textile machinery) Computer peripherals Packing machine And other automatic systems requiring high precision control.
Customers should follow the principle of “selecting stepper motors first, then select driver based on existing stepper motor” It is best not to use the full-step driving mode to drive a hybrid stepping motor, and the vibration is bigger under full-step driving. Hybrid stepper motor is more suitable for low-speed occasions. We suggest the speed does not exceed 1000 rpm (6666PPS at 0.9 degrees), preferably between 1000-3000PPS (0.9 degrees), and it can be attached with a gearbox to lower it’s speed. The motor has high working efficiency and low noise at suitable frequency. Due to historical reasons, only the motor with a nominal 12V voltage uses 12V. Other rated voltage on design drawing is not exactly the most suitable driving voltage for the motor. Customers should choose suitable driving voltage and suitable driver based on own requirement. When the motor is used with high speed or large load, it generally does not start at the working speed directly. We suggest to gradually increases the frequency and speed. For two reasons: First, the motor does not lose steps, and second, it can reduce noise and improve the positioning accuracy. The motor should not work in the vibration area(below 600 PPS ). If it must be used at slow speed, vibration problem could be reduced by changing the voltage, current or adding some damping. When the motor works below 600PPS (0.9 degrees), it should be driven by small current, large inductance and low voltage. For loads with a large moment of inertia, a large size motor should be selected. When higher precision is required, it could be solved by adding gearbox, increasing the motor speed, or using subdivision driving. Also a 5-phase motor(unipolar motor) could be used, but the price of the entire system is relatively expensive, so it’s rarely used.We currently have 20mm(NEMA8), 28mm(NEMA11), 35mm(NEMA14), 42mm(NEMA17), 57mm(NEMA23), 86mm(NEMA34) hybrid stepper motors. We suggest to determine motor size first, then confirm other parameter, when you select a hybrid stepper motor.We provide customization service on motor including lead wire number(4wires/6wires/8wires), coil resistance, cable length and color, also we have multiple height for customers to choose. Regular output shaft is D shaft, if customers require leads screw shaft, we provide customization service on lead screws, and you can adjust lead screw type and shaft length. Picture below is a typical hybrid stepper motor with trapezoidal lead screw.
