low noise high quality 3.3V 6mm micro stepper motor 2 phase 4 wire stepper motor
low noise high quality 3.3V 6mm micro stepper motor 2 phase 4 wire stepper motor
Get superior performance with our low noise high quality 3.3V 6mm micro stepper motor. We are a factory dedicated to providing efficient 2 phase 4 wire stepper motors.
VSM0613 is a micro stepping motor. The motor diameter is 6 mm, the height is 7 mm, the diameter of the output shaft is 1 mm, and the height of the conventional output shaft is 3.1 mm. The length of the output shaft can be customized according to the customer's installation needs. The motor output shaft is equipped with a conventional gear with a module of 0.2, a number of teeth of 9, and a gear thickness of 1.8 mm. The gear can also be customized according to the customer's requirementsThe output shaft of the motor can also be equipped with gear, pulley, worm, screw and other corresponding output devices, which can be customized according to customer installation requirementsBecause of its small size, high precision, easy control and other excellent characteristics, this micro stepping motor is widely used in cameras, optical instruments, lenses, precision medical devices, and other fields.The motor input part of the connecting line can be changed to bare needle, PCB, FPC and other forms according to customer requirements.
PRODUCT NAME
6 MM MICRO STEPPER MOTOR
MODEL
VSM0613
MAX. STARTING FREQUENCY
1300 PPS min. (AT 3.3 V DC)
MAX. SLEWING FREQUENCY
2500 PPS min. (AT 3.3 V DC)
PULL IN TORQUE
0.8gf-cm min. (AT 500 PPS , 3.3V DC)
PULL OUT TORQUE
1.0gf-cm min. (AT 500 PPS , 3.3V DC)
INSULATION CLASS
CLASS E FOR COILS
INSULATION STRENGTH
3.0mA (max.)
INSULATION RESISTENCE
1 MΩ (DC 100 V)
OPERATING TEMPERATURE RANGE
-10~+60 ℃
OEM & ODM SERVICE
AVAILABLE
Motor’s design can be adjusted based on customer’s requirement including:Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motorCoil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.Lead time for samples: Standard motors in stock: within 3 daysStandard motors not in stock: within 15 daysCustomized products: About 25~30 days (based on complexity of customization)Lead time for building a new mold: generally about 45 daysLead time for mass production: based on order quantityPackaging:Samples are packed in foam sponge with a paper box, shipped by expressMass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)If shipped by sea, product will be packed on palletsOn samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service) For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)1.Are you a manufacturer?Yes, we are a manufacture, and we produces mainly stepper motors.2.Where is your factory location? Can we visit your factory?Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.3.Can you provide free samples?No, we don’t provide free samples. Customers won’t treat free samples fairly.4.Who pays for shipping cost? Can I use my shipping account?Customers pay for shipping cost. We will quote you shipping cost.If you think you have cheaper/more convenient shipping method, we can use you shipping account.5.What’s you MOQ? Can I order one motor?We don’t have MOQ, and you can order only one piece sample.But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.6.We are developing a new project, do you provide customization service? Can we sign a NDA contract?We have over 20 years of experience in stepper motor industry.We have developed many projects, we can provide full set customization from design drawing to production. We are confident we can give you few advice/suggestions for your stepper motor project.If you are worrying about confidential issues, yes, we can sign a NDA contract.7.Do you sell drivers? Do you produce them?Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.We do not produce drivers, we only produce stepper motorsMotor’s speed is determined by driving frequency, and it has nothing to do with load (unless it’s losing steps).Due to high precision speed control of stepper motors, with a driver controlled stepping you can achieve very precise positioning and speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.Our micro stepper motors generally have 18 degrees step angle.(Full step driving)That means it takes 20 steps to rotate one turn.Motor’s step angle is related to internal stator’s design.We have micro stepper motors with different diameters, and motor’s torque is related to its size.Here is relationship between motor’s diameter and torque(with suitable running frequency, at rated voltage):6mm motor: about 1 g*cm8mm motor: about 3g*cm10mm motor: about 5 g*cm15mm motor: about 15 g*cm20mm motor: about 40 g*cm
Motor’s design can be adjusted based on customer’s requirement including: Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher. Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable. PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.Lead time for samples: Standard motors in stock: within 3 days Standard motors not in stock: within 15 days Customized products: About 25~30 days (based on complexity of customization) Lead time for building a new mold: generally about 45 days Lead time for mass production: based on order quantity Packaging: Samples are packed in foam sponge with a paper box, shipped by express Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air) If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service) For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)1.Are you a manufacturer? Yes, we are a manufacture, and we produces mainly stepper motors. 2.Where is your factory location? Can we visit your factory? Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us. 3.Can you provide free samples? No, we don’t provide free samples. Customers won’t treat free samples fairly. 4.Who pays for shipping cost? Can I use my shipping account? Customers pay for shipping cost. We will quote you shipping cost. If you think you have cheaper/more convenient shipping method, we can use you shipping account. 5.What’s you MOQ? Can I order one motor? We don’t have MOQ, and you can order only one piece sample. But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up. 6.We are developing a new project, do you provide customization service? Can we sign a NDA contract? We have over 20 years of experience in stepper motor industry. We have developed many projects, we can provide full set customization from design drawing to production. We are confident we can give you few advice/suggestions for your stepper motor project. If you are worrying about confidential issues, yes, we can sign a NDA contract. 7.Do you sell drivers? Do you produce them? Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production. We do not produce drivers, we only produce stepper motors
Motor’s speed is determined by driving frequency, and it has nothing to do with load (unless it’s losing steps). Due to high precision speed control of stepper motors, with a driver controlled stepping you can achieve very precise positioning and speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.
Our micro stepper motors generally have 18 degrees step angle.(Full step driving) That means it takes 20 steps to rotate one turn. Motor’s step angle is related to internal stator’s design. We have micro stepper motors with different diameters, and motor’s torque is related to its size. Here is relationship between motor’s diameter and torque(with suitable running frequency, at rated voltage): 6mm motor: about 1 g*cm 8mm motor: about 3g*cm 10mm motor: about 5 g*cm 15mm motor: about 15 g*cm 20mm motor: about 40 g*cm
